Bluetooth Garage Door Opener

Opening and closing the garage door via mobile bluetooth

Now you can add a third smart way to control the opening and closing of the garage door, except for the remote and the interior button, without changing the garage door or the controller and motor for the garage.

It makes mobile devices and other smart devices work as a remote control to open and close the garage door, up to 20 smart devices that work as a remote control for your garage

It can be defined and controlled by several mobile devices.

To be added to the wires of the opening and closing button of the garage door.

Easy to install

More than one door can be controlled (up to 4 doors) .

Range up to 30 meters.

Easy to define and program.

High security by authorizing and canceling approved tours by opening .

The device provides a mechanism to push the button of the garage key or the remote door on your behalf.

Adds a third feature to open the garage door

It does not communicate with the garage door motor or its control device, but only connects externally to the opening and closing button.

: The wires of your garage door “switch” “button” key are connected in parallel with the terminals of an automatic key inside the device to perform the process of opening and closing the door through the communication of the smart devices application with the device and giving it the command via Bluetooth technology, which connects the key, as if you press your finger on the key but through the machine,

Two simple steps:

Ensure that the electrical current is disconnected from the garage until the installation and connection of the device is completed

1- Install and connect:

After installing the device in the appropriate place and connecting the power adapter

• Connect the transformer wires to device terminals 3- and 4+.
• Locate the garage door opening and closing button, and identify the two ends of the wires connected to the button.
• Connect two wires from both ends (supplied on the unit).
• Connect the two wires to terminals 5 and 7.

* Most of the existing “roller” garage keys consist of one button and use two wires connected to connections No. 5 and 7.

2- Define the device on the mobile/mobile phones

You need to download the driver from the store and then configure bluetooth on the device.

Unit specifications:

• Equipped with Bluetooth version 4 for IOS devices
• Equipped with Bluetooth version 3 for Android devices
• Range up to 30 meters
• Driver for 1 gateway, another for 4 gateways
• Recognizes up to 20 devices
• The app works to run 4 units

Technical characteristics:

• Receiver unit: 18V
• Operating voltage: AC/DC 12-24V
• Channel outputs: 3 channel breaker
• Breaker connection points: 3A 120V open connection points
• Operating temperature tolerance: -20 - 85°C

Package Contents:

1. Bluetooth controller
2. Instructional sheets for how to connect, drivers and drivers links.
3. Electric transformer to feed the device DC Adapter 12V 2A AC 200-240V.
4. Device installation, connection and wire management group

2 screws and 2 wall anchors “Khabour”

3 plastic wire organizer jumpers

2m CAT3 wire 2 pairs of wires to connect to the switch and terminal wires stripped and shielded.

Device dimensions:

Transformer dimensions and specifications:

Package dimensions:

8cm x 14cm x 8cm

country of origin:

China

More functions and works carried out by the device:

The device works as a multi-connect and identify Bluetooth remote momentary switch,

Momentary multiple gangs Bluetooth switch

Therefore, it can be connected in several ways according to your need, use, and definitions as follows:-

- Touch key for electric garage doors | Double doors

Instant smart garage

A unibody that uses two connection points (such as the button to open the outer door of the house or the "roller" pull-out garage found in most homes).

- It is used as a two-way physical touch switch (such as keys for gates and garages with two buttons, one for opening and the other for locking).

It consists of 3 connection points, one of which is common.

- It is also equipped with an additional end for the third key to stop, which is found in some types of garages.

The device is very practical as a two-door garage

And his idea can be exploited intelligently in operating any of the various electrical appliances or loads from a distance, as it is equipped with a multifunctional switch that works with an electrical circuit breaker via Bluetooth technology, and the switch provides several types of momentary switches with 4 wires to connect the opening, locking and stopping signal and connects in parallel with the wires of the switch The manual of your garage depends on the type of key if it is one button that uses two wires or if it is two buttons that uses three wires, and if the key you have 3 buttons for opening, locking and stopping uses 4 wires to connect the internal key. One of these wires is common to connect the current between the other two or three and they are one for a signal The garage opened, the other to stop, and the last to close.